115
Recording
This effect blurs peripheral areas to give the impression of a
diorama.
∫ Setting the type of defocus
With [Miniature Effect] you can make the subject stand out by intentionally creating
defocused and in-focus portions. You can set the recording orientation (defocus
orientation) and the position and size of the in-focus portion.
1 Touch [ ].
2 Touch [ ] to display the setting screen.
•
You can also display the setting screen by touching the screen on the recording screen.
• You can also display the setting screen by pressing [Fn1].
3 Touch [ ] to set the recording orientation (defocus orientation).
4 Touch the in-focus portion.
•
It is also possible to move the in-focus portion using the
cursor button.
5 Pinch out/pinch in (P16) to change the size of the
in-focus portion.
•
It can be changed to 3 different sizes.
• Enlarge/reduce can also be performed by rotating the control dial.
• If you touch [Reset], settings for the non-blurred portions are restored to the initial
settings.
6 Touch [Set].
[Miniature Effect]
Items that can be set
Freshness
Understated
colors
Pop
colors
To Next Page
Loading...
