194
Motion Picture
Focusing varies depending on the settings of the [Focus Mode] and the [Continuous AF] in
the [Motion Picture] menu.
¢ When [Continuous AF] is set to [OFF], the focus is locked to the position set at the start of
recording.
• Depending on the recording conditions or lens used, operational sound may be recorded when
the Auto Focus is operated while recording a motion picture. It is recommended to record with
[Continuous AF] in the [Motion Picture] menu set to [OFF], if the sound of operation bothers you
to avoid recording the lens noise.
• When operating the zoom when recording motion pictures, it may take time to come into focus.
1
Start recording by pressing the motion
picture button.
A Elapsed recording time
B Available recording time
• Recording of motion picture appropriate for each mode is
possible.
• The recording state indicator (red) C will flash while
recording motion pictures.
• If approximately 1 minute elapses without an operation
being performed, part of the display will disappear. Press
[DISP.] or touch the monitor to make the display
reappear.
• When recording a motion picture, do not cover the
microphone with your fingers or other objects.
• Release the motion picture button right after you press it.
2
Stop the recording by pressing the motion picture button again.
• Still picture recording is also possible during the motion picture recording by fully
pressing the shutter button. (P197)
How to set focus when recording a motion picture (Continuous AF)
Focus Mode Settings
AFS/AFF/AFC
The camera automatically keeps focusing on subjects during
recording.
¢
• To readjust the focus, press the shutter button halfway.
MF You can focus manually.
Recording Motion Picture
37
R1m37s
3
s
3
s
To Next Page
Loading...
