119
Recording
This effect adds a cast of light to the scene.
∫ Setting the light source
You can change the position and size of the light source.
1 Touch [ ].
2 Touch [ ] to display the setting screen.
•
You can also display the setting screen by pressing [Fn1].
3 Touch the location where you want to place the
center of the light source.
•
The position of the light source can also be moved with the
cursor button.
• The center of the light source can be moved to the edge of
the screen.
4 Pinch out/pinch in (P16) to adjust the size of the light
source.
•
It can be changed to 4 different sizes.
• Enlarge/reduce can also be performed by rotating the
control dial.
• Touching [Reset] returns the light source setting to the
default setting.
5 Touch [Set].
•
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
[Sunshine]
Items that can be set
Color Yellow tone/Red tone/Blue tone/Standard tone
•
Touch to select the color balance you
wish to generate.
Point for when placing the center of the light source
A more natural appearance can be created by placing the center of the light source
outside the image.
To Next Page
Loading...
