94
Recording
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure. Which items of the settings change will depend on the Recording
Mode.
• In the following cases, suitable exposure cannot be set. (Exposure meter is displayed)
–When the subject is extremely dark and it is not possible to achieve adequate
exposure by changing the aperture value or shutter speed
–When recording using the flash
–In Preview Mode (P93)
–When using a lens that includes an aperture ring
• In Program AE Mode, you can cancel program shift by pressing function button.
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
• If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode. For more details
on Manual Exposure Assistance, refer to P91.
1 Set the [Fn Button Set] of the [Custom] menu to [One Push AE]. (P46)
•
The following step is an example in which [One Push AE] is assigned to [Fn1].
2 (When exposure is not adequate) Press [Fn1].
Recording
Mode
Settings that change
Aperture value
Shutter speed
Aperture value/Shutter speed
16
0
4000400040003.53.53.5
989898
-3-3 0 +3
−
−
3
+
30
989898
16
0
SSSSSS
F
15 250
4.0 5.6 8.0
1256030
6060603.5
-3-3 0 +3
16
0
4000
40003.5
3.5
98
98
-3