163
Recording
Select a Drive Mode
Applicable modes:
Selecting the drive mode allows you to switch the operation, such as burst recording or the
self-timer, for when you press the shutter button.
1
Press 4 ().
2
Select a drive mode.
• Touching [More settings] allows you to change the settings for each drive mode.
3
Touch [Set].
A When this is touched, drive mode is returned to default (Single).
B Drive mode
Drive mode Description of settings
1
[Single] (P58)
When the shutter button is pressed, only one picture is
recorded.
2
[Burst] (P164)
Recordings are made in succession while the shutter
button is pressed.
3 [Auto Bracket] (P167)
Each time the shutter button is pressed, recordings
are made with different exposure settings according to
the Exposure Compensation range.
4
[Self Timer] (P170)
When the shutter button is pressed, recording takes
place after the set time has elapsed.
To Next Page
Loading...
