127
Recording
Changing the settings for a power zoom lens
This may only be selected when using a lens that is compatible with power zoom
(electrically operated zoom).
–
The interchangeable lens (H-PS14042) is compatible with power zoom.
– The interchangeable lenses (H-FS1442A, H-FS45150) are not compatible with power zoom.
(For compatible lenses, please refer to our website.)
[MENU] > [Custom]>[Power Zoom Lens]
Item
Settings
[Disp Focal
Length]
When you zoom, the focal distance is
displayed and you can confirm the zoom
position.
A Focal distance indication
B Current focal distance
[ON]/[OFF]
[Step Zoom] When you operate the zoom with this
setting [ON], the zoom will stop at
positions corresponding to predetermined
distances.
C Step zoom indication
• [Step Zoom] is disabled during motion
picture recording.
[ON]/[OFF]
[Zoom
Resume]
When you turn this unit on, the zoom positions when you last turned
this unit off are automatically restored.
[ON]/[OFF]
[Zoom Speed] You can set the zoom speed for zoom operations.
•
If you set [Step Zoom] to [ON], the zoom speed will not change.
[Photo]:
[H] (High speed)/ [M] (Middle speed)/ [L] (Low speed)
[Video]:
[H] (High speed)/ [M] (Middle speed)/ [L] (Low speed)
[Zoom Ring] This may only be selected when a power zoom-compatible lens with a
zoom lever and zoom ring is attached. When set to [OFF], the
operations controlled by the zoom ring are disabled to prevent
accidental operation.
[ON]/[OFF]
To Next Page
Loading...
