158
Recording
Setting the display method of the MF Assist
Displaying/not displaying the MF Guide
∫ Displaying the MF Assist
•
This is displayed by moving the focus lever, rotating the focus ring, or touching the screen. (In
the Creative Control Mode [Miniature Effect], MF Assistance cannot be displayed by touching
the screen)
• It can also be displayed by pressing 2 to display the setup screen for the enlarged area,
deciding the area to enlarge using the cursor button, and then pressing [MENU/SET].
∫ Changing the display of the MF Assist
You can switch the magnification factor between approx. 4 times, 5 times and 10 times. In
the case of 4 times magnification, the central region is magnified. In the case of 5 and 10
times magnification, the whole screen is magnified.
•
You can change the magnification by touching [ ]/[ ] or rotating the control dial.
∫ Moving the enlarged area
•
The enlarged area can be moved by dragging the screen (P16), or pressing the cursor button.
• The following will return the MF assistance to the original position.
– When the [Focus Mode] is set to other than [MF]
– Changing [Aspect Ratio] or [Picture Size]
– Turning the camera off
– When [Reset] is touched in the setup screen for the enlarged area
[MENU] > [Custom]>[MF Assist]
Item
Settings
[]
Enlarge by rotating the focus ring or moving the focus lever, or by
pressing 2 ().
[ ] Enlarge by rotating the focus ring or moving the focus lever.
[]
Enlarge by pressing 2 ().
[OFF] MF Assist is not displayed.
[MENU] > [Custom]>[MF Guide]>[ON]/[OFF]
MF ASSIST
To Next Page
Loading...
