168
Recording
4
Focus on the subject and take a picture.
• If you press and hold the shutter button, the number of
pictures that you set is taken.
• The Auto Bracket indication blinks until the number of
pictures that you set is taken.
• The picture count is reset to [0] if you change the Auto Bracket setting or turn the
camera off before all the pictures that you set are taken.
∫ Canceling the Auto Bracket
Select [ ] (single picture recording) or [ ] from among the drive modes.
(P163)
∫ Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1 Select [Auto Bracket] in the [Rec] menu. (P38)
2 Touch [Single/Burst Settings], [Step] or [Sequence].
3 Touch the setting.
•
You can take one picture at a time when set to [ ].
• You can continuously take pictures up to set numbers when set to [ ].
• Exit the menu after it is set.
Item
Settings
[Single/Burst Settings]
[] (single)
[ ] (burst)
[Step]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[Sequence]
[0/`/_]
[`/0/_]
To Next Page
Loading...
