Panasonic Lumix DMC-GF6 - Page 19

19
Before Use
Function lever can be used in 2 ways, for zoom operations
(P124) and for Exposure Compensation (P138).
Move the lever to left or right to operate.
To assign a function to the Function Lever
You can assign a function to the function lever. The default setting is [AUTO].
Function Lever
[MENU] > [Custom]>
[Function Lever]
Item Description of settings
[AUTO]
When the lens is replaced, the camera automatically assigns the setting
suitable for the lens in use.
•
When using an interchangeable lens (H-PS14042) that supports the power
zoom (electrically operated zoom), the camera assigns the [ZOOM] operation.
• When using an interchangeable lens (H-FS1442A, H-FS45150) that does not
support the power zoom, the camera assigns the [EXP.] operation.
[ZOOM]
Zoom operations are operable.
[EXP.]
Exposure compensation is operable. (In the Manual Exposure Mode:
Aperture setting is operable.)
Displaying/not displaying the operation guide
[MENU] > [Custom]>
[Dial Guide]>[ON]/[OFF]
• When [ON] is set, the operation guide for dials, buttons, levers,
etc. is displayed on the recording screen.
98
98
98
-3
-3 0 ＋3
ZOOM
603.5
-3
-3
-3
-3 00 ＋3＋3
-3-3 00 ＋3＋3