233
Wi-Fi/NFC
Using the NFC function, you can transfer images in the camera to a smartphone/tablet.
An image can be sent on site immediately after taking it, so you can easily send it to the
smartphone/tablet
¢
of your family or friend.
¢ Installing the “Image App” is required for use.
1 Play back the picture you want to transfer to the smartphone/tablet in the
camera.
2 Launch “Image App” on the smartphone/tablet at the transfer destination.
•
The screen for selecting the connection destination is displayed after the launch.
3 While [ ] is displayed on the connection screen of the “Image App”, touch
the smartphone/tablet to [ ] of this unit.
•
It may take time to complete the connection.
• If a connection attempt by touching fails, restart the “Image App”, and then display the
screen in step
2 again.
• When transferring multiple images, repeat steps 1 and 3. (They cannot be transferred as
a batch)
• Depending on the environment you are using, it may take a few minutes to complete the image
transfer.
Transferring/saving images stored in the camera easily with NFC
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON]. (P268)
• Set [Touch Sharing] to [ON]. (P268)
(On your smartphone/tablet)
•
Check that your smartphone/tablet is a
compatible model.
• Turn on the Wi-Fi function.
• Install the “Image App” in advance. (P227)
To Next Page
Loading...
