6. Shutter and Drive Settings
188
1 Select a 4K burst file on the playback screen, and
press 3.
•
4K burst files are displayed with [ ].
• You can also perform the same operation by touching the
icon [ ].
• The slide view screen for selecting pictures will be
displayed. It takes a few seconds until the screen is
displayed.
2 Touch and drag the frames to select the frame you want to save as a picture.
•
You can also perform the same operation by pressing
2
/
1
.
3 Press [MENU/SET] to save the picture.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
• If you connect the camera to a TV with an HDMI micro cable or AV cable (optional) and display
4K photos recorded with [ ] ([4K Pre-Burst]) on the TV, they will be displayed on the 4K burst
playback screen, which normally shows the playback of 4K photos recorded with [ ] ([4K
Burst]) or [ ] ([4K Burst(S/S)]). (P187) The slide view screen will not be displayed.
4K burst files recorded with [ ] ([4K Pre-Burst])
Button operation Touch operation Description of operation
2/1 Touching>Dragging Selects a frame
Pinching out/in
Enlarges/reduces the display
3/4/2/1 Dragging
Moves the enlarged area
(during enlarged display)
[MENU/SET] Saves the picture
To Next Page
Loading...
