2. Getting Started/Basic Operations
72
• Some functions cannot be used depending on the mode or displayed screen.
• When using [Ex. Tele Conv.] (still pictures), check that [Picture Size] is set to [M] or [S].
• When set to [Focus Area Set], it is possible to display the position setting screen of either AF
area or MF Assist.
• When [1 Shot RAW+JPG] is set, it will record the RAW file and a fine JPEG image
simultaneously once only. It will return to original quality after recording.
• When [1 Shot Spot Metering] is set, it will record with [Metering Mode] set to [ ] (spot) once
only. It will return to original Metering Mode after recording.
• Operations of the cursor button and [MENU/SET] are disabled when [Cursor Button Lock] is
set. Press the function button again to enable them.
• When [Restore to Default] is set, function button settings return to the default configuration.
Not available in these cases:
•
[Fn1] is not available when recording with [ ] ([4K Burst(S/S)]) of 4K Photo.
• [Fn5] cannot be used in the following cases.
– When using [Multi Exp.]
– When using [Time Lapse Shot]
• [Fn7] cannot be used in the following cases.
– Intelligent Auto Mode
– Intelligent Auto Plus Mode
– Creative Control Mode
• [Fn8], [Fn9], [Fn10], [Fn11], and [Fn12] cannot be used when the viewfinder is in use.
You can directly set an assigned function to a selected image by pressing the function
button during playback.
•
The following functions can be assigned to the button [Fn1], [Fn2], [Fn4], [Fn5], [Fn6], [Fn7] or
[Fn13].
¢ Function button settings at the time of purchase.
• When [Restore to Default] is set, function button settings return to the default configuration.
Making the function button settings for playback
[Playback] Menu/Playback functions
– [Favorite] (P280): [Fn2]
¢
– [Print Set] (P281)
– [Protect] (P282)
– [Delete Single] (P259)
– [Off]: [Fn1]
¢
/[Fn4]
¢
/[Fn5]
¢
/[Fn6]
¢
/[Fn7]
¢
/
[Fn13]
¢
– [Restore to Default]
To Next Page
Loading...
