141
5. 4K Photo and Drive Settings
Taking Pictures Automatically at Set Intervals
([Time Lapse Shot])
Applicable modes:
The camera can automatically take pictures of subjects such as animals or plants as time
elapses and create a motion picture.
•
Set the date and time settings in advance. (P35)
• Pictures taken with Time Lapse Shot are displayed as a set of group pictures. (P184)
1 Select the menu. (P54)
•
Recording may not be consistent with the set recording interval or the set number of
pictures depending on recording conditions.
2 Press 3/4 to select [Start] and then press [MENU/SET].
3 Press the shutter button fully.
•
The recording starts automatically.
• During recording standby, the power will turn off automatically if no operation is performed
for a certain period. The Time Lapse Shot is continued even with the power turned off.
When the recording start time arrives, the power turns on automatically.
To turn on the power manually, press the shutter button halfway.
• Operations during recording standby (The camera is turned on)
> [Rec] > [Time Lapse Shot]
[Start Time]
[Now] Starts the recording by fully-pressing the shutter button.
[Start Time
Set]
Any time up to 23 hours 59 minutes ahead can be set.
Select the item (hour or minute) by pressing
2
/
1
,
set the start time by pressing
3
/
4
, and then
press [MENU/SET].
[Shooting
Interval]/
[Image Count]
The recording interval and the number of pictures can be set.
2/1: Select the item (minute/second/number of pictures)
3/4: Setting
[MENU/SET]: Set
Button
operation
Touch
operation
Description of operation
[Fn3]
Displays a selection screen that lets you pause or stop
the recording
Displays a selection screen that lets you resume or
stop the recording (during pause)
MENU
To Next Page
Loading...
Need help?
General
