6. Stabiliser, Zoom and Flash
162
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1 Select the menu. (P54)
2 Press 2/1 to set the flash output and then press [MENU/SET].
•
You can adjust from [j3 EV] to [i3 EV] in steps of 1/3 EV.
• Select [n0] to return to the original flash output.
• [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
• It can be set only when [Wireless] in [Flash] is set to [OFF] and [Firing Mode] is set to [TTL].
(P158, 164)
• The [Flash Adjust.] setting also applies to an external flash. (P307)
Applicable modes:
Select the menu. (P54)
Settings: [ON]/[OFF]
•
For details on Exposure Compensation, refer to P110.
• The [Auto Exposure Comp.] setting also applies to an external flash. (P307)
Adjust the flash output
> [Rec] > [Flash] > [Flash Adjust.]
Synchronising the output of the flash to the Exposure Compensation
> [Rec] > [Flash] > [Auto Exposure Comp.]
To Next Page
Loading...
