5. 4K Photo and Drive Settings
142
4 Select the methods for creating a motion picture.
•
The recording format is set to [MP4].
5 Select [OK] with 3/4, and then press [MENU/SET].
•
Motion pictures can also be created from [Time Lapse Video] in the [Playback] menu.
(P243)
• This function is not for use in a security camera.
• [Time Lapse Shot] is paused in the following cases.
– When the charge on the battery runs out
– Turning the camera off
During [Time Lapse Shot], you can replace the battery and the card, and then restart by turning
on this unit. (Note that pictures taken after the restart will be saved as a separate set of group
pictures) Turn off this unit when replacing the battery or the card.
• When creating motion pictures with a [Rec Quality] setting of [4K/25p] or [4K/24p], recording
times are limited to 29 minutes and 59 seconds.
– When using an SDHC Memory Card, you cannot create motion pictures with a file size
exceeding 4 GB.
– When using an SDXC Memory Card, you can create motion pictures with a file size
exceeding 4 GB.
• A motion picture with a [Rec Quality] setting of [FHD/50p], [FHD/25p], [HD/25p], or [VGA/25p]
cannot be created if the recording time exceeds 29 minutes and 59 seconds or the file size
exceeds 4 GB.
Not available in these cases:
•
This function is not available in the following cases:
– [Handheld Night Shot] (Scene Guide Mode)
– When [Simultaneous record w/o filter] of [Filter Settings] is set to [ON]
– When using [Multi Exp.]
– When using [Stop Motion Animation]
[Rec Quality] Sets the quality of a motion picture.
[Frame Rate]
Sets the number of frames per second.
The larger the number is, the smoother the motion picture will be.
[Sequence]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
To Next Page
Loading...
