7. Recording Motion Pictures
178
Set the frames that specify the positions where the [Pull
Focus] starts (first position) and stops (second position).
1 Press 2.
2 Press 3/4/2/1 to move the AF area frame, and
press [MENU/SET]. (First position)
•
If you press [DISP.] before pressing [MENU/SET], the frame will return to the centre.
3 Repeat step 2. (Second position)
•
If you press [MENU/SET], the frame settings will be cancelled.
Touch a subject (first position), drag your finger to the desired location (second
position), and release the finger.
•
If you touch [ ], the frame settings will be cancelled.
• When the camera fails to set the frame, it returns to the first position.
• When [Pull Focus] is set to [ON]:
– Auto Focus Mode will be switched to [ ], a setting specially designed for [Pull Focus].
– If you take a picture, the Auto Focus operation [Ø] will take place at the first frame position.
• Even when [Metering Mode] (P194) is set to [ ], the spot metering target does not move with
focus. The target is fixed at the start position (first position) of Pull Focus.
Not available in these cases:
•
This function is not available in the following cases:
– In Manual Focus
– When using the Digital Zoom
Setting up [Pull Focus]
Button operation
Touch operation
• A greater effect can be achieved by creating a striking contrast of focus between the
start and end positions, for example by shifting focus from the background to
foreground, or vice versa.
• After setting focus, try to keep the distance between the subject and the camera
constant.