9. Using Menu Functions
212
[AF Assist Lamp]
(continued)
• The AF Assist Lamp gets slightly blocked when the
interchangeable lens (H-FS12032/H-FS35100/H-H020A)
is used, but it does not affect the performance.
• The AF Assist Lamp may be greatly blocked, and it may
become harder to focus when a lens with large diameter
is used (such as H-FS14140).
• The setting is fixed to [OFF] in the following cases.
– [Distinct Scenery]/[Bright Blue Sky]/[Romantic Sunset
Glow]/[Vivid Sunset Glow]/[Glistening Water]/[Clear
Nightscape]/[Cool Night Sky]/[Warm Glowing
Nightscape]/[Artistic Nightscape]/[Handheld Night Shot]
(Scene Guide Mode)
– When [Silent Mode] is set to [ON]
s
[Direct Focus Area]
Moves the AF area or MF assist using the cursor button
when recording.
• When [š], [ ], [ ], or [Ø] is selected, the AF area
can be moved; when [ ] is selected, the enlarged
position can be moved.
• To set the items that use the cursor buttons like [Drive
Mode], [White Balance], or [Sensitivity], use the Quick
Menu (P56) instead.
• [Direct Focus Area] is fixed to [OFF] in the following cases:
– [Glistening Water] (Scene Guide Mode)
– Creative Control Mode
– When [4K Live Cropping] is set
s
[Focus/Release Priority] It will set so no picture can be taken when it is out of focus. s
[AF+MF]
When AF Lock is ON (press the shutter button halfway with
the focus mode set to [AFS] or set AF Lock using [AF/AE
LOCK]), you can make fine adjustments to the focus
manually.
s
> [Custom]
MENU
To Next Page
Loading...
