9. Using Menu Functions
224
[TV Connection]
[Video Out]:
Set to match the colour television system in each
country
when the HDMI micro cable is connected.
[NTSC]:
Video output is set to NTSC system.
[PAL]:
Video output is set to PAL system.
[HDMI Mode (Play)]:
Set the format for the HDMI output when playing back on
the HDMI compatible high-definition TV connected with
this unit using the HDMI micro cable.
[AUTO]:
The output resolution is automatically set based on
the information from the connected TV.
[4K]:
The progressive method with 2160 available scan
lines and an output resolution of 3840k2160 are
used for output.
[1080p]:
The progressive method with 1080 available scan
lines is used for output.
[1080i]:
The interlace method with 1080 available scan lines
is used for output.
[720p]:
The progressive method with 720 available scan
lines is used for output.
[576p]
¢1
/[480p]
¢2
:
The progressive method with 576
¢1
/480
¢2
available
scan lines is used for output.
¢1 When [Video Out] is set to [PAL]
¢2 When [Video Out] is set to [NTSC]
• This will work only during playback.
• If no image appears on the TV with [AUTO], switch the
setting to a constant setting other than [AUTO] to set a
format supported by your TV. (Read the operating
instructions for the TV.)
P292
> [Setup]
MENU
To Next Page
Loading...
