3. Recording Modes
70
In Programme AE Mode, you can change the preset aperture value and shutter speed
without changing the exposure. This is called Programme Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Programme AE Mode.
1 Press the shutter button halfway and display the aperture value and shutter
speed value on the screen.
2 While the values are displayed (about 10 seconds),
perform Programme Shift by rotating the rear dial or
front dial.
A Programme Shift indication
• It will switch between Programme Shift operation and
Exposure Compensation operation (P110) every time the rear dial is pressed while the
values are displayed.
• To cancel Programme Shift, turn off this unit or rotate the front/rear dial until the
Programme Shift indication disappears.
Programme Shift can easily be cancelled by setting a function button to [One Push AE].
(P76)
Not available in these cases:
•
Programme Shift is not available in the following cases:
– When recording 4K photos
– When recording with [Post Focus]
– When the ISO sensitivity is set to [ ]
Programme Shift
60
604.0
4.0
2
00
SS
SS
F
0
98
98
250 15
4.0 5.6 8.0
3060125
To Next Page
Loading...
