Recording pictures (basic)
48
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the
difference of brightness between the subject and the background.
Preparation
• Set the operational mode dial except for [ ]. (P30)
1 Press [ ] until
[ EXPOSURE] appears on the
screen to compensate the
exposure.
• You can compensate from j2EV
to i2 EV in steps of 1/3 EV.
¬
Suggestions/Tips
¬
• EV is an abbreviation of Exposure
Value, and it is the amount of light
given to the CCD by the aperture
value and the shutter speed.
• The compensation range of the
exposure will be limited depending on
the brightness of the subject.
• The exposure compensation value
appears on the lower left of the
screen.
• The exposure value is memorized
even if the camera is turned off.
• You cannot compensate the exposure
in manual exposure.
SET
EXPOSURE
REVIEW
REVIEW
LC1PP.book 48 ページ ２００４年１月２６日 月曜日 午後６時５０分
To Next Page
Loading...
Need help?
General
