Playback (advanced)
94
Formatting the Card
Preparation
• Set the operational mode dial to playback mode [ ]. (P30)
1 Select [FORMAT].
2 Select [YES] to format.
¬
Suggestions/Tips
¬
• Usually, it is not necessary to format
the card (initializing). Format the card
when the message [MEMORY CARD
ERROR] appears.
• If the card has been formatted by a PC
or other equipment, format the card on
the camera again.
• After formatting, recorded pictures and
any other data cannot be recovered.
• If the card is formatted all images
and data will be permanently
erased. They cannot be reclaimed.
If any important pictures are on the
card, please copy them to your PC
before proceeding.
• During formatting, do not turn the
camera off.
• When the remaining battery power
(P11) is low, use the AC adaptor.
• If the card is protected, you cannot
format the card.
• If the card cannot be formatted,
consult your nearest servicenter.
PLAY
2
/
2
SETUP
TRIMMING
RESIZE
FORMAT
EXITSETSELECT
MENU
MENU
REVIEW
REVIEW
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
YES NO
SETSELECT
REVIEW REVIEW
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@panasonic.com
For Canadian assistance, please call:
1-800-561-5505 or visit us at www.panasonic.ca
LC1PP.book 94 ページ ２００４年１月２６日 月曜日 午後６時５０分
To Next Page
Loading...
Need help?
General
