Recording pictures (basic)
50
Taking Pictures with the Self-timer
Preparation
• Set the operational mode dial except for [ ]. (P30)
1 Switch the self-timer setting.
: Self-timer set to 10 seconds
;
: Self-timer set to 2 seconds
;
No display (canceled)
2 Focus on the subject to take the
picture.
• If you press the [MENU] button
when the self-timer is set, the
self-timer setting is canceled.
¬
Suggestions/Tips
¬
• When using a tripod or in other cases,
setting the self-timer to 2 seconds is a
convenient way to stabilize the jitter
(camera shake) caused by pressing
the shutter button.
• The self-timer
indicator 1 blinks
and the shutter is
activated after
10 seconds (or
2 seconds).
• When pressing the button fully at a
stroke, the subject is automatically
focused after the self-timer indicator
turns off.
• When setting the self-timer in the burst
mode, you can take only 1 picture.
• We recommend using a tripod when
setting the self-timer.
2560
19
P
REVIEW
2560
19
P
CANCEL
MENU
LC1PP.book 50 ページ ２００４年１月２６日 月曜日 午後６時５０分
To Next Page
Loading...
