Panasonic Lumix DMC-SZ5 Operating Instructions

- 121 -
Wi-Fi
To print pictures wirelessly
• The Wi-Fi connection setup screen is displayed if you have not done the Wi-Fi setup yet.
Follow the on-screen instruction to configure.
• See the following website for information on the PictBridge (wireless LAN-compatible)
printer.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Select [Wireless Print] in the [Wi-Fi] menu. (P41)
• If you have already set the connection destination, the confirmation screen is displayed. Select [Yes].
• Press [ ] to quit [Wireless Print].
∫ To print a single picture
Refer to “Selecting a single picture and printing it” on P148 for details.
∫ To print multiple pictures
Refer to “Selecting multiple pictures and printing them” on P148 for details.
∫ To change the connection destination
1 Press [DISP.] on the destination confirmation screen.
2 Press 3/4 to select the item, and press [MENU/SET].
∫ To change the wireless access point
1 Press [DISP.] on the destination confirmation screen.
2 Press 3/4 to select [Change Access Point], and press [MENU/SET].
3 Press 3/4 to select a name of registered wireless access point or [New Access
Point], and press [MENU/SET].
•
When you select [New Access Point], a new access point will be registered to this unit.
Note
•
Motion pictures cannot be printed out.

Panasonic Lumix DMC-SZ5 Specifications

General

Brand	Panasonic
Model	Lumix DMC-SZ5
Category	Digital Camera
Language	English