- 97 -
Playback/Editing
Recorded motion picture can be divided in two. It is recommended for when you want to divide a
part you need with a part you do not need.
It cannot be restored once divided.
Note
•
[Video Divide] may not be performed on motion pictures recorded with other equipment.
• Motion pictures cannot be divided at a location close to the start or end of the motion picture.
• The order of images will change if motion pictures are divided.
It is recommended to search these motion pictures by using [Calendar] or [Category Selection] in the
[Filtering Play].
• Motion pictures with a short recording time cannot be divided.
[Video Divide]
1
Select [Video Divide] on the [Playback] menu. (P41)
2
Press 2/1 to select the motion picture to divide, and then press [MENU/
SET].
3
Press 3 at the location to divide.
• Motion picture is played back from the same location when 3 is
pressed again.
• You can finely adjust the location for division by pressing 2/1 while
the motion picture is paused.
4
Press 4.
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• Motion picture may be lost if the card or battery is removed while processing the dividing.
To Next Page
Loading...
Need help?
General
