- 61 -
Recording
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
Note
•
EV is an abbreviation of [Exposure Value], a unit indicating the amount of exposure. The EV
changes with the aperture value or the shutter speed.
• The set exposure value is memorised even if the camera is turned off.
• The compensation range of the exposure will be limited depending on the brightness of the subject.
Underexposed Properly exposed Overexposed
Compensate the exposure
towards positive.
Compensate the exposure
towards negative.
1
Press 3 [È] until [Exposure] appears.
2
Press 2/1 to compensate the exposure
and then press [MENU/SET].
• The exposure compensation value appears on the
screen.
• Select [0 EV] to return to the original exposure.
To Next Page
Loading...
Need help?
General
