- 125 -
Wi-Fi
How to Use the [Wi-Fi Setup] Menu
By a single operation, you can make all the settings required for using the Wi-Fi functions.
1
Select [Wi-Fi Setup] in the [Wi-Fi] menu. (P41)
2
Press 3/4 to select [Wi-Fi Wizard], and press [MENU/SET].
• Set up according to the on-screen instruction. Refer to P108 for details.
Set up this unit to connect to the wireless access point.
1
Select [Wi-Fi Setup] in the [Wi-Fi] menu. (P41)
2
Press 3/4 to select [Access Point], and press [MENU/SET].
3
Press 3/4 to select [Add], and press [MENU/SET].
4
Press 3/4 to select the connection method, and press
[MENU/SET].
[Wi-Fi Wizard]
[Access Point]
Connection method Description of settings
[WPS (Push-Button)]
Save push button type wireless access point that is compatible
with Wi-Fi Protected Setup
TM
with a WPS mark.
[WPS (PIN)]
Save PIN code type wireless access point that is compatible with
Wi-Fi Protected Setup with a WPS mark.
[Manual Connection]
Search for available wireless access points.
• Confirm encryption key of the selected wireless access point if
the network authentication is encrypted.
• When connecting by [Add wireless AP], confirm SSID,
encryption type, encryption key of the wireless access point you
are using.
To Next Page
Loading...
Need help?
General
