- 135 -
Wi-Fi
To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect
saved personal information, it is recommended that you protect the Wi-Fi function with a
password.
Setting a password will automatically display the password input screen when the Wi-Fi
function is used.
1
Select [Wi-Fi Setup] in the [Wi-Fi] menu. (P41)
2
Press 3/4 to select [Wi-Fi Password], and press [MENU/SET].
3
Press 3/4 to select [Setup], and press [MENU/SET].
4
Enter a password and press [MENU/SET].
• Enter any 4-digit numbers as the password.
• For details on how to enter characters, refer to “Entering Text” section on P71.
5
Enter the password entered in step 4 again and press [MENU/SET].
• Close the menu after changing settings.
∫ Cancel the Wi-Fi password
1 Select [Wi-Fi Setup] in the [Wi-Fi] menu. (P41)
2 Press 3/4 to select [Wi-Fi Password], and press [MENU/SET].
3 Press 3/4 to select [Delete], and press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Note
•
Make a copy of password. If you forget the password, you can reset it with [Reset Wi-Fi Settings] in
the [Setup] menu, however other settings will also be reset.
• The password entered when using the Wi-Fi function will be active until turn this unit off.
[Wi-Fi Password]
To Next Page
Loading...
Need help?
General
