- 137 -
Connecting to other equipment
Playing Back Pictures on a TV Screen
Pictures recorded with this unit can be played back on a TV screen.
•
Please use the optional AV cable (DMW-AVC1).
Preparations:
Set the [TV Aspect]. (P48)
Turn this unit and the TV off.
1
Connect the camera and a TV.
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may bend out of shape, which may cause malfunction.)
• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
2
Turn the TV on and select external input.
3
Turn the camera on and then press [(].
Note
•
Depending on the [Picture Size], black bands may be displayed on the top and bottom or the left and
right of the pictures.
• Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
• When you play back a picture vertically, it may be blurry.
• When pictures are displayed, they may not be displayed properly depending on the type of TV.
• You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when
you set [Video Out] in the [Setup] menu.
• No sound is output from the camera speakers.
• Read the operating instructions for the TV.
A Yellow: to the video input socket
B White: to the audio input socket
C AV cable (optional)
D Align the marks, and insert.
To Next Page
Loading...
Need help?
General
