- 133 -
Wi-Fi
Images can be sent to the AV device of relatives and acquaintances via “LUMIX CLUB”.
•
See the following site for AV device that is compatible with “LUMIX CLUB”.
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
1
Select [Wi-Fi Setup] in the [Wi-Fi] menu. (P41)
2
Press 3/4 to select [External AV device], and press [MENU/SET].
3
Press 3/4 to select [Add new device], and press [MENU/SET].
4
Enter the address number and select [Set].
• Refer to “Entering Text” (P71) for information on how to enter text.
5
Enter the access number and select [Set].
6
Enter any name and select [Set].
• A maximum of 28 characters can be entered.
A maximum of 14 characters can be entered for [ ], [ ], [ ], [ ] and [ ].
• Close the menu after changing settings.
Information on AV device that has already been saved can be changed or deleted.
1 Select [Wi-Fi Setup] in the [Wi-Fi] menu. (P41)
2 Press 3/4 to select [External AV device], and press [MENU/SET].
3 Press 3/4 to select the AV device you want to change or delete, and press [MENU/
SET].
4 Press 3/4 to select [Edit] or [Delete], and press [MENU/SET].
•
Exit the menu after it is executed.
[External AV device]
Preparation:
Check the address number (16-digit number) and access number (4-digit number) of the
destination AV device issued by “LUMIX CLUB”.
(Refer to the AV device instruction manual for details)
Change or delete information on registered AV device
Item Description of settings
[Edit]
Change information on AV device that has already been registered.
Perform steps
4 through 6 in [External AV device].
[Delete]
Delete information on AV device that has already been registered.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
To Next Page
Loading...
Need help?
General
