- 18 -
Preparation
Inserting and Removing the Card (optional)
• Check that this unit is turned off.
• We recommend using a Panasonic card.
1
Slide the release lever in the direction of
the arrow and open the card/battery
door.
2
Push it securely all the way until you
hear a “click” while being careful about
the direction in which you insert it.
To remove the card, push the card until it
clicks, then pull the card out upright.
A: Do not touch the connection terminals of the
card.
3
1: Close the card/battery door.
2: Slide the release lever in the direction
of the arrow.
Note
•
Turn the camera off and wait for the “LUMIX” display on the LCD monitor to clear before removing
the card. (Otherwise, this unit may no longer operate normally and the card itself may be damaged
or the recorded pictures may be lost.)
To Next Page
Loading...
Need help?
General
