- 96 -
Playback/Editing
6
Press 3/4 to select the settings, and then press [MENU/SET].
7
Press [ ].
8
Press 3 to select [OK], and then press [MENU/SET].
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Note
•
When you print pictures stamped with text, the date will be printed over the stamped text if you
specify printing of the date at the photo shop or on the printer.
• You can set up to 50 pictures at one time in [MULTI].
• The picture quality may deteriorate when text stamping is carried out.
• Depending on the printer being used, some characters may be cut at printing. Check before printing.
• When text is stamped onto the 0.3M pictures, it is difficult to read it.
• Text and dates cannot be stamped on the pictures in the following cases.
– Motion pictures
– Pictures taken in [Panorama Shot] in Scene Mode
– Pictures recorded without setting the clock
– Pictures with date or text stamped
– Pictures recorded with other equipment
Item Setting item
[Shooting Date]
[W/O TIME]:
Stamp the year, month and day.
[WITH TIME]:
Stamp the year, month, day, hour and minutes.
[OFF]
[Name]
[]
([Baby/Pet]):
Stamps names registered in name settings for [Baby1]/
[Baby2] or [Pet] in Scene Mode.
[OFF]
[Location]
[ON]: Stamps the travel destination name set under [Location].
[OFF]
[Travel Date]
[ON]: Stamps the travel date set under [Travel Date].
[OFF]
To Next Page
Loading...
Need help?
General
