- 142 -
Connecting to other equipment
∫ Disconnecting the USB connection cable safely
Select the [ ] icon in the task tray displayed on the PC, and then click [Eject
DMC-XXX] (XXX varies by model).
• Depending on your PC’s settings, this icon may not be displayed.
• If the icon is not displayed, check that [Access] is not displayed on the LCD monitor of the digital
camera before removing the hardware.
∫ Connection in the PTP Mode
Select [PictBridge(PTP)] when connecting USB connection cable.
•
Data can now be read only from the card in the PC.
• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP Mode.
• Motion picture cannot be played back in PTP Mode.
To Next Page
Loading...
Need help?
General
