- 46 -
Basic
• High Angle Mode is also cancelled if you turn the camera off.
• The brightness of the pictures displayed on the LCD monitor is increased so some subjects may
appear different from real life on the LCD monitor. However, this does not affect the recorded
pictures.
• The LCD monitor automatically returns to normal brightness after 30 seconds when recording in
Power LCD Mode. Press any button to make the LCD monitor bright again.
• When [LCD Mode] is set, the usage time is reduced.
[LCD Mode]
These menu settings make it easier to see the LCD monitor when you
are in bright places or when you are holding the camera high above
your head.
[„] ([Auto Power LCD])
¢
:
The brightness is adjusted automatically depending on how bright it is
around the camera.
[…] ([Power LCD]):
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
[Å] ([High Angle])
¢
:
The LCD monitor is easier to see when taking pictures with the camera
held high above your head.
[OFF]
¢ Can be set only when Recording Mode is set.
To Next Page
Loading...
Need help?
General
