Advanced (Recording pictures)
- 92 -
Note
•
The number of days that have passed since the departure date can be printed out using the
“PHOTOfunSTUDIO 5.0 HD Edition” bundled software on he CD-ROM (supplied).
• The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date is set.
• When the travel date is set, [—] appears on the lower right of the screen.
• The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME] (P93) to the travel destination, the travel date is calculated using the
date in the clock setting and the travel destination setting.
• The travel date setting is memorized even if the camera is turned off.
• If [TRAVEL DATE] is set to [OFF], the number of days that have passed since the departure
date will not be recorded. Even if [TRAVEL DATE] is set to [SET] after taking the pictures,
which day of the vacation you took them is not displayed.
• If you set a departure date and then take a picture on a date before this departure date, [-]
(minus) is displayed in orange and the day of he vacation on which you took the picture is not
recorded.
• If the travel date is displayed as [-] (minus) in white, there is a time difference that involves date
change between the [HOME] and [DESTINATION]. (It will be recorded).
• [TRAVEL DATE] cannot be set for motion pictures recorded with [AVCHD Lite].
Set a travel destination. The destination is then recorded when you take pictures and can
be displayed at playback. You can stamp your pictures with this information using [TEXT
STAMP] (P131).
[OFF]/[SET]
Setting the travel destination
1 Press to select [SET] and then press [MENU/SET].
2 Enter the travel destination.
•
For details on how to enter characters, refer to “Entering Text” section on P117.
3 Press [MENU/SET] to close the menu.
•
The travel destination you have set is displayed in the [TRAVEL MODE] menu.
To cancel the display of the travel destination
Set
[LOCATION] to [OFF] in Step 1 of “Setting the travel destination”.
Note
•
The travel destination can be printed out using the “PHOTOfunSTUDIO 5.0 HD Edition”
bundled software on the CD-ROM (supplied).
• [LOCATION] cannot be recorded when taking motion pictures.
• You cannot set [LOCATION] when [TRAVEL DATE] has been set to [OFF].
[LOCATION]
To Next Page
Loading...
Need help?
General
