Advanced (Recording pictures)
- 106 -
For details on [REC] Mode menu settings, refer to P22.
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from the pictures you have taken.
Applicable modes:
ñ· ¿
[OFF]/[˜]
The Burst speed is constant regardless of the transfer speed of the card.
• The Burst speed values given above apply when the shutter speed is 1/60 or faster.
Note
•
The focus, exposure and White Balance are fixed when the first picture is taken.
• When the self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3.
• If you are following a moving subject while taking pictures in a place indoors, outdoors
(landscape) etc. where there is a large difference between the light and shade, the exposure
may not become optimal.
• The Burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
• Burst Mode is not canceled when the camera is switched off.
• If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture
data.
• [Œ] is set for the flash when Burst is set.
• Auto Bracket is canceled when Burst is set.
• Burst cannot be used in [TRANSFORM], [PANORAMA ASSIST], [HI-SPEED BURST],
[FLASH BURST], [STARRY SKY], [PIN HOLE], [FILM GRAIN], [HIGH DYNAMIC] or
[PHOTO FRAME] in Scene Mode.
[BURST]
Burst speed (pictures/second) approx. 1.8
Number of recordable pictures
A max. 3
› max. 5
To Next Page
Loading...
Need help?
General
