119
Setting motion picture functions
Editing AVCHD/AVCHD Lite or MPEG2 motion pictures/copying to media
2
Set MPEG2 picture quality
Motion detection settings
[Picture quality priority]:
It will convert with picture quality priority to prevent
the noise. It may take a long time to convert. It is
recommended to use this setting when converting a
fast moving motion picture.
[Normal]: It will convert with standard quality.
[Speed priority]: It will convert with minimal time. More
noise tends to occur for fast moving
motion pictures.
3
Change the settings for copying to
media.
1
Set the hard disk work area and the disc writing speed.
Work area setting
The work area is an area on the PC’s hard disk that is
used temporarily when working.
Select a drive with twice the size of free space than the
size of the disc to create.
●It may not be possible to write in DVD-Video when a drive
with FAT32 file system is selected. Select on NTFS drive.
Disc write speed setting
[Max. speed (recommend)]: Write at the maximum
speed of the drive.
[Normal]: Select if recording failed. It may improve.
To Next Page
Loading...
Need help?
General
