10. Recording Videos
DVQX2068 (ENG)
124
[V-Log View Assist]
When [Photo Style] is set to [V-Log], the recording screen and images
output via HDMI will darken. Using [V-Log View Assist] means you can
show images with LUT data applied on the monitor/viewfinder and output
them via HDMI.
¨ [ ] ¨ [ ] ¨ Select [V-Log View Assist]
Reading LUT Files
1
Insert a card on which LUT data is saved into the camera.
2
Select [Read LUT File].
0
¨ [ ] ¨ [ ] ¨ [V-Log View Assist] ¨ [Read LUT File] ¨ [Card Slot
1]/[Card Slot 2]
3
Press 34 to select the LUT data to read and then press or .
4
Press 34 to select the location to register the data, and then press
or .
0
When registered items are selected, they will be overwritten.
[Read LUT File] Reads LUT data from the card.
[LUT Select]
Selects the LUT data to be applied from among
the preset ([Vlog_709]) and registered LUT data.
[LUT View Assist (Monitor)]
Displays the images with LUT data applied on the
monitor/viewfinder of the camera.
[LUT View Assist (HDMI)] Applies LUT data to images output over HDMI.
0
When applying the LUT data, [LUT] is displayed on the recording screen.
0
Up to 4 LUT data files can be registered.
0
The following LUT data can be used:
– The “.vlt” format, which meets the requirements specified in the “VARICAM
3DLUT REFERENCE MANUAL Rev.1.0”
– File names consisting of up to 8 alphanumeric characters (excluding
extension)
0
Save the LUT data with a file extension of “.vlt” in the root directory of the card
(the folder opened when the card is opened on a PC).
DC-S5E-DVQX2068_eng.book 124 ページ ２０２０年７月２８日 火曜日 午後３時２分
To Next Page
Loading...
