7. Metering/Exposure/ISO Sensitivity
DVQX2068 (ENG)
72
2
Set the aperture value.
≥Rotate or .
3
Start recording.
0
If the correct exposure is not achieved
when the shutter button is pressed
halfway, the aperture value and the
shutter speed blink red.
In [S] mode (Shutter-Priority AE mode), you can set the shutter speed
before recording.
The aperture value will be automatically set by the camera.
1
Set the mode dial to [S].
2
Set the shutter speed.
≥Rotate or .
3
Start recording.
0
If the correct exposure is not achieved
when the shutter button is pressed
halfway, the aperture value and the
shutter speed blink red.
Shutter-Priority AE Mode
F8.0
F8.0
DC-S5E-DVQX2068_eng.book 72 ページ ２０２０年７月２８日 火曜日 午後３時２分
To Next Page
Loading...
