6. Drive/Image Stabilizer
DVQX2068 (ENG)
60
Pictures are taken automatically at a set recording interval.
1
Set the drive mode dial to [ ]. (l 54)
2
Set [Mode] to [Time Lapse
Shot].
≥ ¨ [ ] ¨ [ ] ¨ [Time
Lapse/Animation] ¨ [Mode] ¨
[Time Lapse Shot]
3
Set the recording settings.
4
Close the menu.
≥Press the shutter button halfway.
Recording with Time Lapse Shot
0
Check that the clock is set correctly. (l 33)
0
For long recording intervals, we recommend setting [Lens Focus Resume] to
[ON] in the [Custom] ([Lens / Others]) menu.
[Mode]
Switches between Time Lapse Shot and Stop Motion
Animation.
[Shooting
Interval Setting]
[ON]
Sets the interval before the next
recording takes place.
[OFF]
Takes pictures without leaving
recording intervals.
[Start Time]
[Now]
Starts recording when the shutter
button is pressed fully.
[Start Time Set] Starts recording at the set time.
[Image Count]/
[Shooting
Interval]
Sets the number of pictures and the recording interval to
be taken.
[Exposure
Leveling]
Adjusts the exposure automatically to prevent large
changes in brightness between adjacent frames.
DC-S5E-DVQX2068_eng.book 60 ページ ２０２０年７月２８日 火曜日 午後３時２分
To Next Page
Loading...
