DVQX2068 (ENG)
70
7.
Metering/Exposure/ISO
Sensitivity
Type of optical measurement to measure brightness can be changed.
¨ [ ] ¨ [ ] ¨ Select [Metering Mode]
In [P] mode (Program AE mode), the camera automatically sets the shutter
speed and aperture value for the brightness of the subject.
1
Set the mode dial to [P].
[Metering Mode]
[](Multi-metering)
Method in which the most suitable exposure is
measured by judging the allocation of brightness on
the whole screen.
[](Center-weighted)
Method used to perform measuring which focuses
on the center of the screen.
[](Spot)
Method used to measure the extremely small part
around the spot-metering target.
[](Highlight-weighted)
Method used to perform measuring which focuses
on the highlighted parts of the screen to prevent
overexposure.
This is suitable for theatre photography, etc.
Program AE Mode
DC-S5E-DVQX2068_eng.book 70 ページ ２０２０年７月２８日 火曜日 午後３時２分
To Next Page
Loading...
