11. Connections with External Devices (Video)
DVQX2068 (ENG)
141
Getting started:
0
Turn off the camera, and remove the hot shoe cover. (l 90)
Attach the XLR Microphone Adaptor to the hot shoe, and then turn on the
camera.
0
When the XLR Microphone Adaptor is attached, [XLR Mic Adaptor Setting]
automatically turns [ON].
[ON] Records audio using the XLR microphone.
[OFF] Records audio using the built-in microphone of the camera.
0
While an XLR Microphone Adaptor is attached, [ ] is displayed on the
screen.
0
When [XLR Mic Adaptor Setting] is set to [ON], the following settings are fixed:
– [Sound Rec Level Limiter]: [OFF]
– [Wind Noise Canceller]: [OFF]
– [Sound Output]: [REC SOUND]
0
[Sound Rec Level Adj.] cannot be used when [XLR Mic Adaptor Setting] is set
to [ON].
0
When the XLR Microphone Adaptor is attached, [Sound Rec Level Disp.]
automatically turns [ON], and the recording level is displayed on the screen.
0
When the XLR Microphone Adaptor is attached, do not carry the camera by
holding the XLR Microphone Adaptor. It may become detached.
0
If noises are recorded when using the AC adaptor, use the battery.
0
For details, refer to the operating instructions for the XLR Microphone
Adaptor.
DC-S5E-DVQX2068_eng.book 141 ページ ２０２０年７月２８日 火曜日 午後３時２分
To Next Page
Loading...
