15. Wi-Fi/Bluetooth
DVQX2068 (ENG)
158
1
On the smartphone, start up
“LUMIX Sync”.
≥A message regarding device
(camera) registration is displayed.
Select [Next].
0
If you have closed the message, select
[ ], then register the camera using
[Camera registration (pairing)].
2
Check the content in the
displayed guide and select
[Next] until the screen to
register the camera is displayed.
Operating the camera in accordance with the smartphone guide.
3
Set the camera to Bluetooth
pairing standby state.
≥ ¨ [ ] ¨ [ ] ¨ [Bluetooth]
¨ [Bluetooth] ¨ [SET] ¨ [Pairing]
≥The camera enters pairing standby
state and the device name A is
displayed.
4
On the smartphone, select the
camera’s device name.
0
(iOS devices) When a message to
confirm the change of destination is
displayed, select [Join].
LUMIX Sync
XXXXXXXXXXXX
DC-S5E-DVQX2068_eng.book 158 ページ ２０２０年７月２８日 火曜日 午後３時２分
To Next Page
Loading...
