3. Basic Operations
DVQX2068 (ENG)
39
2
Aim the camera at the subject.
≥When the camera detects the
scene, the recording mode icon
changes.
(Automatic Scene Detection)
3
Adjust the focus.
≥Press the shutter button halfway
(press it gently).
0
The aperture value A and shutter speed
B are displayed.
(When the correct exposure cannot be
obtained, the indications blink in red.)
0
Once the subject is in focus, the focus
icon C lights.
(When the subject is not in focus, the icon
blinks.)
0
[ ] of the AF mode works and the AF
area is displayed aligned to any humans.
4
Start recording.
≥Press the shutter button fully (press
it further).
0
Each press of [ ] changes the AF mode ([ ][ ] ([Face/Eye/Body/
Animal Detect.])/[ ] ([Tracking])).
For information about AF modes, refer to page 47 and 48.
0
When recording using a flash, the camera switches to the appropriate flash
mode for the recording conditions.
DC-S5E-DVQX2068_eng.book 39 ページ ２０２０年７月２８日 火曜日 午後３時２分
To Next Page
Loading...
