6. Drive/Image Stabilizer
DVQX2068 (ENG)
58
[6K/4K Burst(S/S)]
[6K/4K Pre-Burst]
0
In default settings, Auto Review operates, and a screen that lets you select
pictures from a burst file will be displayed.
To continue recording, press the shutter button halfway to return to the
recording screen.
[Pre-Burst Recording] ([6K/4K Burst]/[6K/4K Burst(S/S)])
The camera starts recording approx. 1 second before the shutter button is
pressed fully, so you will not miss a photo opportunity.
¨ [ ] ¨ [ ] ¨ [6K/4K PHOTO] ¨ [Pre-Burst Recording] ¨ Select
[ON]
0
When [Pre-Burst Recording] is being used, [PRE] is displayed on the recording
screen.
1 Press the shutter button fully to start
recording.
2 Press the shutter button fully again to
stop recording.
C Start (First)
D Stop (Second)
E Recording is performed
0
You can add markers by pressing [Q] during recording. (Up to 40 markers per
recording)
Press the shutter button fully.
F Approx. 1 second
G Recording is performed
0
While the recording screen is displayed, the
AF will operate constantly to continue
focusing.
The exposure is also adjusted continuously, except in [M] mode.
DC-S5E-DVQX2068_eng.book 58 ページ ２０２０年７月２８日 火曜日 午後３時２分
To Next Page
Loading...
