6. Drive/Image Stabilizer
DVQX2068 (ENG)
68
[Operation Mode]
Set the stabilization movement (blur) to match the recording method
(normal, panning).
0
Operation modes that can be used will differ depending on the used lenses and on
[Body(B.I.S.) / Lens(O.I.S.)] settings.
0
When using lenses with an O.I.S. switch, the camera’s operation mode cannot be
set to [OFF]. Set the switch on the lens to [OFF].
[Boost I.S. (Video)]
Increase the effectiveness of the image stabilizer during video recording.
This effect can help provide a stable composition when you want to
perform recording from a fixed perspective.
Settings: [ON]/[OFF]
[Boost I.S. (Video)]
Increases the effectiveness of the image stabilizer during
video recording.
This effect can help provide a stable composition when you
want to perform recording from a fixed perspective. (l 68)
[Anamorphic
(Video)]
You can switch to an image stabilizer that suits anamorphic
recording. (l 69)
[Focal Length Set]
When using lenses without a function for communicating
with this camera, manually set the focal length. (l 69)
[Normal]
Corrects vertical, horizontal, and rotational camera
shake.
This function is suitable for normal recording.
[Panning (Auto)]
Automatically detects the panning direction, and corrects
vertical and horizontal camera shake.
This function is suitable for panning.
[Panning (Left/
Right)]
Corrects vertical camera shake.
This is suitable for horizontal panning.
[Panning (Up/
Down)]
Corrects horizontal camera shake.
This is suitable for vertical panning.
[OFF] Turns the image stabilization function OFF.
DC-S5E-DVQX2068_eng.book 68 ページ ２０２０年７月２８日 火曜日 午後３時２分
To Next Page
Loading...
