Wi-Fi / Bluetooth – Connecting to “LUMIX Sync”
619
Send multiple images
1 Press [Q].
2 Select [Multi Select].
•
To change the send settings of images, press [DISP.]. (Image Send Settings:
651)
3 Select the images and then transfer.
21: Select images
: Set/Cancel
[DISP.]: Transfer
4 On the smartphone, select [Yes] (for Android devices) or [Join] (for iOS devices).
•
This connects automatically using Wi-Fi.
Using the menu to transfer easily
[] [] [Bluetooth] [LUMIX Sync Settings] [Send
Image (Smartphone)]
Settings: [Single Select]/[Multi Select]
•
If [Single Select], press 21 to select the image and then press to execute.
•
If [Multi Select], use the same operation as with “Send multiple images”. (Send
multiple images: 619)
•
It is not possible to transfer images with file sizes exceeding 4 GB.
•
Images recorded using the following function cannot be transferred:
– [MOV] videos
•
When recording, recording is prioritized so it will take time for sending to
complete.
•
If the camera is turned off, or the Wi-Fi is disconnected before sending is
completed, then sending will not restart.
•
You may not be able to delete files or use the [Playback] menu while sending.
•
When the following function is being used, [Wi-Fi Function] is not available:
– [Auto Transfer]
To Next Page
Loading...
