Panasonic NV-HD90 - Page 29

Timer Recording from External Signal
Source
If Timer Recording is performed by a unit connected to the
AV socket, select the A1 indicator for the programme
position.
Selecting the Desired Tape Speed
After step 2, press NEXT and select SP or LP by pressing +
so aed
Setting other Programmes In Succession
Repeat steps 1 and 2
Checking a Timer Programme
Select the timer programme number to be checked by
pressing PROG/CHECK while the timer recording function
ison.
Cancelling a Timer Programme
1. Release trom the standby mode by pressing TIMER
REC.
2 Select the timer programme number to be cancelled by
pressing PROG/CHECK.
3 Press + and — simultaneously for more than 3 seconds.
Note:
Tf a timer recording is not performed to the end (due to
insufficient tape or cancellation by the user), the
programmed timer recording data will be cancalled from the
memory by 4 a.m. two days later. :
However, if the Timer Record Function is activated at that
time, the programmed timer recording data wit! be cancelled
aid a.m. the next day.
Timer Recording
Optional Function
PDC (Programme Delivery Control)
The Programme Delivery Contra! (PDC) is a very
convenient system which assures that the TV programmes
you have programmed for timer recording will be recorded
exactly from beginning to end, even if the actual
broadcasting time differs from the scheduled time due to
delayed stari or extension of the programme duration. Also,
if a programme is interrupted and for example, some
special news item is inserted, the recording will also be
interrupted automatically and resumed when the
programme continues.
*This mode! is not equipped with PDC function. The PDC.
function becomes operative when the VTR is equipped
with the optional PDC decoder. Gonsult your autnorized
video dealer.
elf the VTR is equipped with the PDC decoder, the POC
indicator lights when the correct PDC signals are
uansmitted from the broadcasting station.
When t init is set for programmed recording, the PDC
indicator lights whether or not PDC signals are
transmitted. This indicates that the recording has been
Programmed with PDC. To programme a recording
without PDC, press SHIFT in step 2: this cancels the PDC.
function and turns off the PDC indicator.
If this is not done, recording start time may be delayed by
up to 1-minute from the programmed start time. This is not
a
maifunction.
eats
ein the case of PDC recording, use the correct time (PDC
time) for recording the TV programmes. PDC recording is
not performed when the lime (PDC time} is incorrect, even
if only by one minute, i.e. start time as published in TV
Programme guide in newspaper, magazine, teletext, etc.
Since PDC signais are received when a recording is
Programmed using PDC, the power of the unit's tuner
section is turned on and the programmed broadcasting is.
recelved, When a multipe number of programmes have
been programmed for timer recording, all of the
broadcasts concerned will be received in sequence.
‘These broadcasi pictures can be seen on the video
Playback channel and AV (no sound).
if
the
actual
broadcasting
times
of
timer
recordings
overlap
(regardless
of whether
they
are
PDC-contralied),
the
recording
that
starts
first
always
has
priority,
and
the
recording
of the
jater
programme
will
start
only
after
the
first
timer
recording
has
finished.
When the PDC signal drops out because the broadcast
signal is weak, or when a broadcasting station does not
transmit a regular PDC signal, the timer recording wiil be
performed in the normal mode {without PDC) even ifit
was programmed for PDC.
in this case, even if the timer recording is performed,
whatever has Deen programed will not de cancelled at
that particular time but até on the following day.
When programmes transmited by different TV stations
are programmed dy PDC at time when one programme
ends as another starts. the first minute at the start of the
second programme wil not be recorded. <
ions
‘BR Aovanced Operat
239