2.1.1 CHANNEL MEMORY IC
INITIALIZATION
TOP PREVIOUS NEXT
When replacing the Memory IC7801 and/or Oscillator X6001, Memory IC7801 has to be initialized due
to the setting value changes.
Note:
When replacing the memory IC7801, the OSD microprocessor IC7703 should be replaced
together.
1.
It has to be performed before tuning.2.
Meaning of "MEMORY IC INITIALIZATION" is to make dependency in different models and to
distinguish between different features.
3.
It does not need to perform when replacing the System Control IC6001.4.
<CHANNEL MEMORY IC INITIALIZATION>
PROCEDURES FIP Display Monitor Screen
Press the FF and EJECT keys simultaneously for 3 seconds. None
Press the FF and EJECT keys simultaneously more twice. None
Press the EJECT key for 3 seconds. None
Press the CH UP key twice. None
To Next Page
Loading...
