Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 101
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] Decreases the ickering of the displayed image.
[ON] Synchronizes the displayed image to the vertical scanning frequency of the input signal.
Note
f [FRAME LOCK] is not displayed when a signal with the vertical scanning frequency other than the above is input or 2D images are
displayed.
f The image may icker when [FRAME LOCK] is set to [ON].
f The displayed image may look discontinuous when [FRAME LOCK] is set to [OFF].
[RASTER POSITION]
This will allow the position of the image to move within the display area arbitrarily when the input image is not
using the whole display area.
1) Press as to select [RASTER POSITION].
2) Press the <ENTER> button.
f The [RASTER POSITION] screen is displayed.
3) Press asqw to adjust the position.
To Next Page
Loading...
