Panasonic PT-DZ21K2

Chapter 6 Appendix — Specications
216 - ENGLISH
Weight
Approx. 41.0 k] (90.3 lbs.)
*3
Noise level
*1
46 dB
Operating
environment
Operating
environment
temperature
*4
0 °C (32 °F) to 45 °C (113 °F)
Operating
environment
humidity
10 % to 80 % (no condensation)
Remote
control
Power supply DC 3 V (AA/R6/LR6 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
150 ] (5.3 ozs.) (including batteries)
Dimensions Width: 47.5 mm (1-7/8"), Height: 181.5 mm (7-5/32"), Depth: 27.5 mm (1-3/32")
*1 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*2 When the zoom lens (Model No.: ET-D75LE8) is used, the projected image size for the maximum projection distance will be 1.78 m (70") to 15.24 m
(600"). When the xed-focus lens (Model No.: ET-D75LE90) is used, the projected image size for the maximum projection distance will be 3.05 m
(120") to 15.24 m (600").
*3 Average value. Weight varies for each product.
*4 When using the projector at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level), the operating environment temperature
should be between 0 °C (32 °F) and 40 °C (104 °F).
If you use the smoke cut lter, the operating environment temperature should be between 0 °C (32 °F) and 35 °C (95 °F). However, it cannot be
used at high altitudes.
If you use the Replacement lamp unit (for portrait mode), the operating environment temperature should be between 0 °C (32 °F) and 40 °C
(104 °F) when using it at elevations lower than 1 400 m (4 593') above sea level, and should be between 0 °C (32 °F) and 35 °C (95 °F) when
using it at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level). If you use the Replacement lamp unit (for portrait mode)
together with the smoke cut lter, the operating environment temperature should be between 0 °C (32 °F) and 30 °C (86 °F). (Only for PT-DZ21K2,
PT-DS20K2, PT-DW17K2)